Editorial Board

Transactions of the Korean Society of Automotive Engineers - Vol. 26 , No. 1

[Goto Volume List]

1. p. 1 A Study on the Comparative Analysis of Plug-in Hybrid Electric Vehicle Powertrain for the First and Second Generation Volt

Jeongmin Kim
DOI: https://doi.org/10.7467/KSAE.2018.26.1.001

2. p. 11 Diagnosis and Cause Analysis of Intermittent Engine Hesitation of Diesel Vehicle by EGR System Failure

Haengdeug Jo
DOI: https://doi.org/10.7467/KSAE.2018.26.1.011

3. p. 20 Corner Detection-based Road Sign Detection for Low-cost Sensor Fusion-based Precise Localization System

Sung Joo Lee, Jae Kyu Suhr, Ho Gi Jung
DOI: https://doi.org/10.7467/KSAE.2018.26.1.020

4. p. 32 A Study on the Control Algorithm of VCU for Micro-mobility

Taeyeong Lee, Sunwoo Kim, Youngjin Ko
DOI: https://doi.org/10.7467/KSAE.2018.26.1.032

5. p. 42 Transfer Film Formation and Its Effect on Friction Coefficient at Various Friction Temperature in NAO Friction Material

Jinoh Chung, Sangryul Go, Jonggeun Choi, Heebum Choi, Hyangrae Kim
DOI: https://doi.org/10.7467/KSAE.2018.26.1.042

6. p. 52 A Study on the Intellectual Property Level and Performance of Auto Part Company

Changhan Ryu, Baegsu Joo, Minsuk Suh
DOI: https://doi.org/10.7467/KSAE.2018.26.1.052

7. p. 60 The Inlet Shape Optimization of Aftertreatment System for Automotive Vehicle with Adjoint Optimization

Jong Hwa Jung, Geun Sik Lee
DOI: https://doi.org/10.7467/KSAE.2018.26.1.060

8. p. 67 Effect of Cross-drilled Hole Shape on Crack of Disk Brake Rotor

Hyeonjin Kang, Taeksu Jung, Yunhwa Hong, Sungsu Park, Cheongmin Kim, Younghoon Hong, Chongdu Cho
DOI: https://doi.org/10.7467/KSAE.2018.26.1.067

9. p. 77 Upper Legform Impact Test of the EuroNCAP Protocol Using a Human Model

Sang-ok Park, Wook-han Choi, Dea-Geun Son, Gyung-Jin Park, Jae Kon Shin, Kyu Hyun Kim
DOI: https://doi.org/10.7467/KSAE.2018.26.1.077

10. p. 85 A Development of EURO 6 Smart Cluster System Using OBD-II Standard Interfaces and Smart Cluster Interface

Mijin Kim, Sungki Lee, Sanghyun Park
DOI: https://doi.org/10.7467/KSAE.2018.26.1.085

11. p. 97 A Study on the Design Improvement of the Dummy Torso Movement due to the D-ring Position of the Seat Belt of Rear Seat

Cheonho Kim, Seryong Baek, Seongho Kim, Gwangsik Kim, Changkyu Bok, Jonghan Lim
DOI: https://doi.org/10.7467/KSAE.2018.26.1.097

12. p. 106 A Study on the Necessity of Standards Repair Painting Manual for Replacement Door Panel in Car Refinish Painting

Chang Bae You
DOI: https://doi.org/10.7467/KSAE.2018.26.1.106

13. p. 113 Study on Efficient Homogeneous Illumination of Automotive Cup Holder

Pyoung-Chan Lee, Jin Uk Ha, Bo-Ram Kim, Yun Ki Ko, Hyun Uk Lee, Sun Kyoung Jeoung, Yun-Sup Hwang, Jae Uk Jung, Yoo Yong Kim
DOI: https://doi.org/10.7467/KSAE.2018.26.1.113

14. p. 120 Prediction of Mechanical and Spin Power Losses of a Parallel-Axis Geartrain in an Automobile Transmission

Kijong Park, Maru Kang, Sueng Ho Lee, Woochurl Son, Yeo Hyeon Kwon, Ahmet Kahraman
DOI: https://doi.org/10.7467/KSAE.2018.26.1.120

15. p. 131 Supervisory Control Algorithm Design of a 48V 4WD Hybrid Electric Vehicle with Fuel Efficiency Analysis

Kiyun Jeong, Seongmin Ha, Hyeongcheol Lee
DOI: https://doi.org/10.7467/KSAE.2018.26.1.131